Tshuab Taw Qhia
Lub Siab Tsis Siv Neeg Solder Paste Tshuab Luam Ntawv H1500 E yog tsim los rau siab -SMT ntau lawm, xa khoom ruaj khov, ua haujlwm tau zoo, thiab rov ua dua luam ntawv. Nruab nrog cov txheej txheem CCD qib siab tshaj plaws, siab -rigidity luam ntawv platform, thiab kev tswj cov lus taw qhia ntse, nws ua kom muaj qhov tseeb ntawm cov tshuaj pleev xim rau hauv cov qauv PCB loj. Nws cov qauv modular, ceev stencil tu system, thiab streamlined UI interface txo qis downtime thiab yooj yim rau kev khiav lag luam. Nrog rau cov kev xaiv rau MES kev sib txuas, kev tswj xyuas kev taug qab, thiab kev soj ntsuam cov txheej txheem tsis siv neeg, H1500-E muab cov tuam txhab muaj kev ntseeg siab, muaj txiaj ntsig zoo rau cov khoom siv hluav taws xob niaj hnub ntse.
Cov yam ntxwv tseem ceeb
- High -kev sib raug zoonrog siab CCD lub zeem muag thiab ruaj khov kev lees paub.
- Loj - hom luam ntawv muaj peev xwmtxhawb kev siv PCB loj heev.
- Rigid thiab ruaj khov platformtxhawm rau txo cov board deformation thiab txhim kho kev luam ntawv zoo.
- Intelligent tswj systemnrog lub sijhawm tiag tiag- saib xyuas thiab yooj yim-rau- siv interface.
- Ceev ceev tsis siv neeg tu qhov system(qhuav / ntub / nqus) kom tswj tau qhov zoo ntawm stencil.
- Modular tsimkom yooj yim txij nkawm thiab txo downtime.
- MES/traceability tau tshajrau kev lag luam 4.0 cov kab ntau lawm.
- Siab - ceev thiab rov ua haujlwmkom maximize throughput.
Lub 1500 × 510 mm loj - hom ntawv luam ntawv platform, ua ke nrog lub siab -kev ua haujlwm nqus nqus adsorption system, xyuas kom meej meej substrate positioning thiab tshem tawm board warping. Qhov no ruaj khov thiab nruj platform tsim ho txhim khu kev luam ntawv raug thiab tag nrho cov khoom zoo.
Qhov optimized kab rov tav (X-kev taw qhia) scraper system txo cov kev siv tshuaj txhuam hniav thaum ua kom muaj kev sib xyaw ua ke. Nrog rau tus kheej -adaptive scraper caj npab thiab kev tswj xyuas siab heev, nws muab cov ntawv luam zoo ib yam txawm tias loj - hom PCBs.
Lub siab tsis siv neeg kis tau tus mob nta hloov tau yooj yim sab clamping, tsis siv neeg board thickness hloov kho, thiab ib qho kev nias zoo, txo cov txheej txheem sijhawm thiab cov neeg ua haujlwm ua haujlwm. Nrog rau qhov siab tshaj plaws 10 kg substrate hloov pauv muaj peev xwm, nws xa cov kev ua tau zoo dua thiab kev hloov pauv ntau dua rau kev xav tau ntau yam.
Qhov hloov kho CCD qhov chaw tso tawm nta lub koob yees duab 1.3 MP nrog 10 × 8 mm FOV, kom ntseeg tau tias kev sib raug zoo thiab kev sib raug zoo nrog ntau hom MARK. Nrog kev txhim kho barcode scanning thiab kaw - voj MES kev koom ua ke, nws tshem tawm cov teeb meem kev hloov kho ntawm phau ntawv thiab txhim kho qhov chaw ua haujlwm tau zoo thiab ruaj khov ntau lawm.
Qhov kev tu siab tshaj plaws nta cov qauv drip sab saud uas tuaj yeem kho qhov chaw ntub dej kom phim qhov ntev ntawm cov substrate. Nrog rau qhuav, ntub dej, thiab lub tshuab nqus tsev so hom ua ke nrog lub nplhaib kaw - hom roj hmab sawb, nws ua kom huv si stencil tu thiab txhim khu kev luam ntawv zoo.
Ntsiab Specifications
|
Qeb |
Specification |
|
Kev ua tau zoo |
Repeated Positioning Accuracy: ± 15 μm |
|
Repeated Printing Precision: ± 30 μm |
|
|
Tsis suav Kev Ntxuav & Luam Ntawv: < 1.2 sec |
|
|
Ua CT: 6 min |
|
|
Kab Hloov CT: 4 min |
|
|
Laminate processing |
Laminate Dimension: 80 × 50 mm - 1500 × 510 mm |
|
Laminate Thickness: 0.8-6 hli |
|
|
Mechanical Range of Capture: 1500 × 510 hli |
|
|
Maximum Laminate Nyhav: 100 kg |
|
|
Marginal Gap: 3.5 hli |
|
|
Qhov siab saum toj kawg nkaus: 15 mm |
|
|
Transmission Qhov siab: 900 ± 40 mm |
|
|
Max kis ceev: 1500 mm / s |
|
|
Txoj Kev Kis: Ib qho -section qhia kev tsheb ciav hlau |
|
|
Transmission Direction: Sab laug → Txoj Cai / Txoj Cai → Sab laug |
|
|
Kev xa tawm hauv / tawm: Ib sab |
|
|
Laminate Support Method: Sib nqus thimble (65 mm), Txhawb nqa blocks (65 mm) |
|
|
Laminate Clamping: Tus kheej- kho tau platform, Phau ntawv nias ntawv, Yooj yim rau sab clamps |
|
|
Printing Parameters |
Printing ceev: 10-200 mm/s |
|
Printing siab: 0.5-15 kg |
|
|
Kev luam ntawv hom: Ib leeg lossis ob npaug |
|
|
Scraper Hom: Roj Hmab / Hlau (lub kaum sab xis 45℃/ 55℃/ 60 degree) |
|
|
Stripper nrug: 0-20 mm |
|
|
Stripper Ceev: 0-20mm / s |
|
|
Hlau Mesh Loj: 720 × 300 mm - 1180 × 750 mm |
|
|
Mesh Positioning: Phau ntawv |
|
|
Kev huv huv |
Ntxuav System: Qhuav / ntub / Nqus |
|
Ntxuav Txoj Haujlwm: Txoj Cai |
|
|
Kev ceev ceev: 10-200 mm / s |
|
|
Kev Siv Lub Tshuab Ntxuav: Nws pib & Phau Ntawv Qhia |
|
|
Kev Siv Daim Ntawv Ntxuav: Nws pib & Phau Ntawv |
|
|
Vision Parameters |
FOV: 10 × 8 mm |
|
Lub koob yees duab hom: 1.3 MP cov koob yees duab |
|
|
Duab Pickup System: Up- duab kos duab nrog kho qhov teeb pom kev zoo |
|
|
Lub sij hawm ntes: 300ms |
|
|
Datum Hom: Vajvoog, Square, Rhombus, Hla, Bonding ncoo |
|
|
Mark Loj: 0.5-6 mm |
Cov ntaub ntawv khoom siv tsuas yog siv rau kev siv xwb. Thov hu rau peb kom paub meej cov ntaub ntawv tshiab.
Vim Li Cas Koom Tes Nrog Peb
✓ Ntau tshaj li cov cuab yeej muab - ua tiav SMT kab kev daws teeb meem
✓ Kev paub txog qhov project tiag tiag nrog kev teeb tsa thiab khiav SMT kab
✓ Muaj zog engineering txhawb rau automation thiab kev koom ua ke
✓ Txo kev pheej hmoo ntawm kev sib koom ua ke thiab pib ua kab nrawm dua - nce
✓ Muab kev txhawb nqa tshwj xeeb thoob plaws hauv qhov project lifecycle
Txog Peb
Peb tshwj xeeb hauv kev ua tiav SMT kab kev daws teeb meem thiab kev sib koom ua ke automation, xa cov khoom siv txhim khu kev qha thiab cov kab ntau lawm pov thawj txhawb nqa los ntawm kev ua haujlwm tiag tiag.
Solder Paste tshuab luam ntawv - FAQ
Q: 1. Dab tsi yog lub tshuab luam ntawv muab tshuaj txhuam siv rau hauv SMT ntau lawm?
A: Lub tshuab luam ntawv muab tshuaj txhuam yog siv nyob rau hauv SMT cov kab ntau lawm kom raug luam tawm cov nplaum rau hauv PCB pads los ntawm stencil. Nws yog cov txheej txheem tseem ceeb uas cuam tshuam ncaj qha rau qhov zoo ntawm soldering thiab tag nrho cov khoom sib dhos.
Q: 2. Lub tshuab luam ntawv muab tshuaj txhuam ua haujlwm li cas?
A: Lub tshuab luam ntawv muab tshuaj txhuam ua haujlwm los ntawm kev ua kom lub PCB nrog cov stencil thiab siv lub tshuab squeegee los siv cov nplaum nplaum los ntawm cov stencil apertures mus rau PCB pads. Kev sib raug zoo thiab kev luam ntawv ruaj khov yog qhov tseem ceeb rau cov txiaj ntsig zoo ib yam.
Q: 3. Dab tsi ntawm cov tshuab luam ntawv muab tshuaj txhuam yog muaj?
A: Feem ntau ntawm cov tshuab luam ntawv muab tshuaj txhuam muaj xws li cov tshuab luam ntawv phau ntawv, semi- tsis siv neeg tshuab luam ntawv, thiab cov tshuab luam ntawv tsis siv neeg muab tshuaj txhuam. Cov tshuab luam ntawv tsis siv neeg puv yog siv dav hauv cov kab tsim khoom SMT niaj hnub no kom raug thiab siab - ntim khoom.
Q: 4. Yuav ua li cas yog qhov tseem ceeb ntawm kev luam ntawv raug nyob rau hauv solder paste printing?
A: Kev luam ntawv raug yog qhov tseem ceeb, vim tias qhov tsis txaus lossis ntau dhau ntawm cov tshuaj nplaum tuaj yeem ua rau muaj qhov tsis xws luag xws li kev sib txuas, cov pob qij txha, lossis cov pob qij txha tsis txaus. High- cov tshuab luam ntawv muab tshuaj xyuas qhov tseeb pab xyuas kom ruaj khov thiab rov ua dua cov ntawv luam tawm.
Q: 5. Lub tshuab luam ntawv tshuab luam ntawv puas tuaj yeem ua ke nrog SPI systems?
A: Yog. Lub tshuab luam ntawv muab tshuaj txhuam tuaj yeem ua ke nrog SPI (Solder Paste Inspection) tshuab los tsim cov txheej txheem kaw -. Qhov no tso cai rau tiag tiag - lub sij hawm tawm tswv yim thiab tsis siv neeg tsis siv neeg hloov kho kom zoo dua luam ntawv.
Q: 6. Yam dab tsi cuam tshuam rau solder paste luam ntawv zoo?
A: Kev luam ntawv zoo yog cuam tshuam los ntawm stencil tsim, solder paste hom, squeegee siab thiab ceev, PCB flatness, thiab lub tshuab luam ntawv alignment raug. Cov txheej txheem tsim nyog yog qhov tseem ceeb rau kev tsim khoom SMT txhim khu kev qha.
Q: 7. Puas yog lub tshuab luam ntawv muab tshuaj txhuam zoo rau cov hlau lead - cov txheej txheem SMT dawb?
A: Yog. Niaj hnub nimno solder paste tshuab luam ntawv yog tsim los txhawb cov hlau lead -dawb solder paste thiab ua tau raws li qhov tseeb ntawm cov hlau lead- cov txheej txheem SMT dawb.
Q: 8. Dab tsi yog qhov yuav tsum tau ua rau lub tshuab luam ntawv muab tshuaj txhuam?
A: Kev saib xyuas niaj hnub suav nrog kev tu cov stencil, squeegee hniav, thiab lub rooj luam ntawv, nrog rau kev kuaj xyuas cov kab ke thiab cov khoom siv tshuab kom tswj tau cov ntawv luam tawm zoo ib yam.
Q: 9. Kuv yuav xaiv lub tshuab luam ntawv zoo li cas rau kuv SMT kab?
A: Kev xaiv lub tshuab luam ntawv zoo yog nyob ntawm PCB loj, ntim ntau lawm, qhov yuav tsum tau muaj, thiab qib ntawm automation. Ua hauj lwm nrog ib tus kws paub txog SMT kab kev daws teeb meem pab xyuas kom pom kev xaiv lub tshuab luam ntawv thiab kev sib koom ua ke zoo.
Q: 10. Cov tshuab luam ntawv puas tuaj yeem txhawb kev ua haujlwm automation thiab kev sib koom ua haujlwm ntse?
A: Yog. Advanced solder paste printers txhawb automation nta xws li kev nyeem ntawv barcode, MES txuas, tsis siv neeg stencil tu, thiab kab kev sib txuas lus rau ntse SMT Hoobkas ib puag ncig.
Cim npe nrov: Tuam Tshoj tag nrho automatic solder paste tshuab luam ntawv h1500e manufacturers, lwm tus neeg, Hoobkas